Cork Liners for HNT Gordon Front Vises and Pattern Makers Vises:
For Pattern Makers Vise:
This is the cork/rubber lining that can be glued to the jaws of your pattern makers vice. You can choose to only glue the liner to one aluminium jaw (we find this works well for our plane making work), or you can buy 2 pieces of liner and glue them to both jaws.
If you order 1 piece of liner, you will receive the peice shaped to suit the front jaw. If you order two pieces of liner, you will receive both the front jaw and the liner to suit the back jaw.
The liner is cut slightly oversized to allow you to trim the edges once it has been glued.
We use contact adhesive glue to attach it on to the vice. You can get this in spray cans or wipe on form.
Thickness of the cork/rubber liner is 1.5mm.
For Front Vise:
This is the cork/rubber liner that can be glued to the jaw of your front/bench vice.
The liner is cut slightly oversized to allow you to trim the edges once it has been glued.
We use contact adhesive glue to attach it on to the vice. You can get this in spray cans or wipe on form.
Liner thickness is 1.5mm.