{"title":"HNT Gordon and H\u0026S Toolworks","description":"\u003cdiv\u003eHNT Gordon and Co. Classic Plane Makers Australia was established by Terry Gordon in 1995 after several years of development work. They make beautiful hand planes, spokeshaves and other woodworking tools using premium materials including beautiful and very hard Australian Hardwoods such as gidgee.\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThey not only make high quality tools, but also put a lot of thought into the design and ergonomics of what they are making; often taking the best ideas from traditional tools, but not being afraid to go in different directions or make extensive changes if they think there is a benefit.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eAlso from Australia are the superb quality tools made by Harold \u0026amp; Saxon Toolworks.\u003c\/span\u003e\u003c\/div\u003e","products":[{"product_id":"hnt-gordon-tail-vise","title":"HNT Gordon Tail Vise","description":"\u003cp data-mce-fragment=\"1\"\u003eThe HNT Gordon is designed to hold any piece of wood flat on the top of your bench. It is retrofitable to any bench (in any position on the top) without interfering with the integrity of the top.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe knob is 32mm (1-1\/4\") in diameter, knurled for grip and allows for quick movement with plenty of grip to tighten the vise. It is supplied with one solid brass dog that is 6 mm (1\/4\") high for low profile work. Other size dogs will be available also or you can make them to suit using 1\/2\" brass rod.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt is simple to install and it comes with an installation guide. You will need to make a wooden cover plate to go over the top of the vice and this is planed level with the top. If your bench top is thin, this is no problem as you simply make up some wooden packers and glue them in under where the vice is to be fitted.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e100mm Tail Vice:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eThe vise body is a hefty 32mm x 35mm x 280mm long with a 5\/8\" 6 tpi ACME thread for a quick moving action. It gives you just over 100mm (3.94\") travel so you would need to space your bench dog holes at 100mm or less apart.\u003cbr data-mce-fragment=\"1\"\u003eWeighs 1.3 kg.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e150mm Tail Vice: \u003c\/strong\u003eThe vise body is a hefty 32mm x 35mm x 370mm long with a 5\/8\" 6 tpi ACME thread for a quick moving action. It gives you just over 150mm (5.9\") travel so you would need to space your bench dog holes at 150mm or less apart. \u003cbr data-mce-fragment=\"1\"\u003eWeighs 1.6kg.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHere is a video showing the tail vise being installed:\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca title=\"Workbench installation\" href=\"https:\/\/youtu.be\/rDk3I8A01Og\"\u003ehttps:\/\/youtu.be\/rDk3I8A01Og\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDownload Installation Instructions 100 mm \u003ca title=\"100 mm Vise Installation Instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/files\/TailVice_PRINT_VERSION_1.doc?v=1624754522\"\u003eVise \u003cspan data-mce-fragment=\"1\"\u003ehttps:\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/files\/TailVice_PRINT_VERSION_1.doc?v=1624754522\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDownload Installation Instructions 150 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca title=\"150 mm Vise Installation Instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/files\/LongTailVice_PRINT_VERSION_1.doc?v=1624754522\"\u003e \u003cspan data-mce-fragment=\"1\"\u003ehttps:\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/files\/LongTailVice_PRINT_VERSION_1.doc?v=1624754522\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"HNT Gordon","offers":[{"title":"100 mm Travel","offer_id":39364244701286,"sku":"HNT100mmVise","price":369.99,"currency_code":"CAD","in_stock":true},{"title":"150 mm Travel","offer_id":39364244734054,"sku":"HNT150mmVise","price":404.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/products\/100mmTailVise.jpg?v=1624754065"},{"product_id":"hnt-gordon-front-vise","title":"HNT Gordon Front Vise","description":"\u003cp data-mce-fragment=\"1\"\u003eThe design of the HNT Gordon front vise incorporates precision machined concentric tubes to eliminate racking.  It is easy to install and features 6 TPI ACME threads for fast movement with the threads hidden to prevent wear.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eJAW:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e160mm x 230mm\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eOPENING CAPACITY:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e150mm\u003cbr\u003e\u003cstrong\u003eWEIGHT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e8kg\u003cbr\u003e\u003cstrong\u003eTHREAD:\u003c\/strong\u003e \u003cspan\u003e6 TPI ACME for fast, smooth action.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThread is hidden to prevent wear.\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003eDESIGN \u0026amp; MANUFACTURE:\u003c\/strong\u003e U\u003cspan\u003enique design, manufactured by in Australia\u003c\/span\u003e\u003cbr\u003e                                    \u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eVice does come with 1\/2\" dog holes drilled in the top of the vice as seen in some of the photos\/videos. We recently decided to standardize on including them because it is difficult for most customers to add them.\u003c\/div\u003e","brand":"HNT Gordon","offers":[{"title":"Default Title","offer_id":39991505092710,"sku":"HNT Gordon Front Vise","price":839.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/products\/HNTGordonfrontvise1.jpg?v=1671404022"},{"product_id":"hnt-gordon-large-curved-sole-spokeshave","title":"HNT Gordon Large Curved Sole Spoke shave","description":"\u003cp data-mce-fragment=\"1\"\u003eHNT Gordon makes this Large Curved Sole Spoke Shave out of brass and gidgee, which is a very hard and dense Australian hardwood.  The brass sole has a 75mm (3\") radius and is 280mm long x 24 mm wide x 22 mm high (11\" x 0.95\" x 0.87\").  It weighs about 500 g (1.1 lbs).  The blade dimensions are 45mm wide x 1.6mm thick x 34mm long (1.75\" wide x 1\/16\" thick x 1.35\").  Two blade materials are available: Tool Steel (TS) blade hardened to Rc 62-64 or a High Speed Steel (HSS) blade hardened to Rc 62. \u003cspan data-mce-fragment=\"1\"\u003eThe HSS is ideal if you plan to reverse the blade to bevel up and use it as a scraper on hard timber.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a 55 degrees blade pitch which is ideal for planing are variety of woods with the blade in it's normal bevel down position and by reversing the blade (to bevel up) it will perform as a scraper for use of hard cranky woods.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUsed for fine finishing of inside curves. You can also plane a combination of inside and outside curves with one pass once you have mastered this tool.\u003c\/p\u003e","brand":"HNT Gordon","offers":[{"title":"TS Blade","offer_id":39991507845222,"sku":"HNT Gordon Large Curved Spokeshave TS","price":309.99,"currency_code":"CAD","in_stock":true},{"title":"HSS Blade","offer_id":39991507877990,"sku":"HNT Gordon Large Curved Spokeshave HSS","price":333.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/products\/LargeCurvedSpokeshave1.jpg?v=1671406858"},{"product_id":"hnt-gordon-large-flat-sole-spoke-shave","title":"HNT Gordon Large Flat Sole Spoke shave","description":"\u003cp data-mce-fragment=\"1\"\u003eHNT Gordon makes this Large Curved Sole Spoke Shave out of brass and gidgee, which is a very hard and dense Australian hardwood.  The flat sole is made from brass and the overall size is 280mm long x 24 mm wide x 22 mm high (11\" x 0.95\" x 0.87\").  It weighs about 500 g (1.1 lbs).  The blade dimensions are 45mm wide x 1.6mm thick x 34mm long (1.75\" wide x 1\/16\" thick x 1.35\").  Two blade materials are available: Tool Steel (TS) blade hardened to Rc 62-64 or a High Speed Steel (HSS) blade hardened to Rc 62. \u003cspan data-mce-fragment=\"1\"\u003eThe HSS is ideal if you plan to reverse the blade to bevel up and use it as a scraper on hard timber.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt has a 55 degrees blade pitch which is ideal for planing are variety of woods with the blade in it's normal bevel down position and by reversing the blade (to bevel up) it will perform as a scraper for use of hard cranky woods.\u003c\/p\u003e\n\u003cdiv\u003eUsed for fine finishing of outside curve work or profiling straight pieces of wood into ovals, rounds etc. such as a spoke.\u003c\/div\u003e","brand":"HNT Gordon","offers":[{"title":"TS Blade","offer_id":39991512236134,"sku":"HNT Gordon Large Flat Sole Spokeshave TS","price":299.99,"currency_code":"CAD","in_stock":true},{"title":"HSS Blade","offer_id":39991512268902,"sku":"HNT Gordon Large Flat Sole Spokeshave HSS","price":309.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/products\/HNTGordonlargeflatsolespokeshave.jpg?v=1671411081"},{"product_id":"hnt-gordon-1-inch-shoulder-plane","title":"HNT Gordon 1 Inch Shoulder Plane","description":"\u003cp\u003eThis gidgee 1\" Shoulder Plane is used to clean up the shoulders of tenons and tenon tongues across the grain or a rebate with the grain.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is 198mm long x 1\" wide x 60mm high. \u003c\/span\u003e\u003cspan\u003eWeighs 0.8 Kg and has a 3\/16\" thick x 1\" wide Tool steel blade hardened to Rc 62-64.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIt has a 60 degrees blade angle for planing or 90 degrees for scraping hard\/cranky grain (by reversing the blade to bevel up). \u003c\/span\u003e\u003c\/p\u003e","brand":"HNT Gordon","offers":[{"title":"Default Title","offer_id":39991512891494,"sku":"HNT Gordon 1 Inch Shoulder Plane","price":339.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/products\/HNTgordon1inchshoulderplane3.jpg?v=1671411886"},{"product_id":"hnt-gordon-block-plane","title":"HNT Gordon Block Plane","description":"\u003cp class=\"\" data-mce-fragment=\"1\"\u003eThis block plane has a higher blade pitch of 55 degrees - optimized for hard, difficult timber. However, it works equally as well on softer woods. Used for general purpose planing or trimming of any small pieces of wood, particularly hardwood and end grain. Easily used in one hand.\u003c\/p\u003e\n\u003cul data-rte-list=\"default\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eIt is 6 7\/8” long x 2 1\/8” wide x 1 1\/2 ” high.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eWeighs 1.75 lbs.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eOption of an O1 Tool Steel (O1 TS) blade hardened to RC 62-64\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eOR\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eHigh Speed Steel (HSS) blade hardened to RC 62.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eBlade pitch of 55 degrees - optimized for hard, difficult, or figured woods.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eBlade is reversible to bevel up, effectively creating a blade pitch of 85 degrees, allowing the plane to be used as a scraper. It’s two tools in one!\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eThe HSS is ideal if you plan to reverse the blade to bevel up and use it as a scraper since it will hold up better under heat. However, it will take longer to sharpen.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eThe blade is 3 3\/16” long x 1 1\/2” wide x 1\/8” thick.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eKnob handle superbly shaped by Ross Burgess.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eThe plane body is Gidgee, a very dense and stable Australian wood.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HNT Gordon","offers":[{"title":"TS Blade","offer_id":39991515414630,"sku":"HNT Gordon Block Plane TS","price":309.99,"currency_code":"CAD","in_stock":false},{"title":"HSS Blade","offer_id":39991515447398,"sku":"HNT Gordon Block Plane HSS","price":349.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/products\/HNTGordonBlockPlane.jpg?v=1671412758"},{"product_id":"hnt-gordon-radius-plane","title":"HNT Gordon Radius Plane","description":"\u003cp class=\"\" data-mce-fragment=\"1\"\u003eThis Radius Plane is curved both along and across its sole. It is specifically designed for shaping the seat of a Windsor Chair or other tasks that the radius of the sole will suit.\u003c\/p\u003e\n\u003cul data-rte-list=\"default\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eRadius along length of sole is 9\".\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eRadius across the width of the sole is 3”.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eIt is 5 1\/8” long x 2 3\/16” wide x 1 1\/2” high.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eWeighs 1 lb.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eOption of an O1 Tool Steel ( O1 TS) blade hardened to RC 62-64\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eOR\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ea High Speed Steel (HSS) Blade hardened to RC 62.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eBlade pitch of 55 degrees for superior results on hard, difficult, or reversing grain.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eBlade is reversible to bevel up, effectively creating a blade pitch of 85 degrees, allowing the plane to be used as a scraper. You get two tools in one!\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eThe HSS is ideal if you plan to reverse the plane to bevel up and use it as a scraper on difficult grain because it will hold up better under heat. However, it will take longer to sharpen.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eThe blade is 1\/8 \" thick x 1 1\/2\" wide.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eMade from Gidgee, a very dense and stable Australian wood.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HNT Gordon","offers":[{"title":"TS Blade","offer_id":39991520231526,"sku":"HNT Gordon Radius Plane TS","price":309.99,"currency_code":"CAD","in_stock":true},{"title":"HSS Blade","offer_id":39991520264294,"sku":"","price":369.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/products\/HNTGordonRadiusPlane1.jpg?v=1671413802"},{"product_id":"hnt-gordon-a55-smoothing-plane","title":"HNT Gordon A55 Smoothing Plane","description":"\u003cp class=\"\" data-mce-fragment=\"1\"\u003eThis A55 Smoothing Plane is similar to a traditional tote \u0026amp; handle plane with a mechanical adjuster. This suits many woodworkers who are used to this style and like to have an adjuster over a wedge mechanism. A smoothing plane is an essential hand tool for woodworking, as it has the ability to smooth any difficult wood after it has been milled by hand tool or machine.\u003c\/p\u003e\n\u003cul data-rte-list=\"default\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eIt is 9 7\/8” long x 2 5\/8” wide x 1 1\/2” high.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eWeighs almost 3.5 lbs.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eOption of an O1 Tool Steel (O1 TS) blade hardened to RC 62-64\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eOR\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003ea High Speed Steel (HSS) blade hardened to RC 62.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eBlade pitch of 55 degrees which will be optimum on hard woods or difficult \u0026amp; reversing grain.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eBlade is reversible to bevel up, effectively creating a blade pitch of 85 degrees, allowing the plane to be used as a scraper. It’s two tools in one!\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eWe recommend choosing the HSS if you wish to reverse the blade to bevel up and use the plane as a cabinet scraper, as it will hold its edge longer under heat. However, it will take longer to sharpen.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eThe blade is 3 7\/8” long x 2” wide x 1\/4” thick.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eThe 40 TPI fine thread screw is for blade depth adjustment (one 10th of a turn gives meaningful change in depth of 0.001\"). It also allows you to laterally adjust the blade.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eThe plane body is made from Gidgee, a very dense and stable Australian wood.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HNT Gordon","offers":[{"title":"TS Blade","offer_id":39991791845478,"sku":"HNT Gordon A55 TS","price":524.99,"currency_code":"CAD","in_stock":true},{"title":"HSS Blade","offer_id":39991791878246,"sku":"HNT Gordon A55 Smoother HSS","price":569.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/products\/HNTGordonA55SmoothingPlane.jpg?v=1671504828"},{"product_id":"hnt-gordon-small-curved-sole-spoke-shave","title":"HNT Gordon Small Curved Sole Spoke shave","description":"\u003cp data-mce-fragment=\"1\"\u003eThis gidgee small curved sole Spoke Shave has a 10mm radius (3\/8\") and is 235 long x 12mm wide x 12mm high. Weighs 90 grams and has a 19mm wide x 1.2mm thick x 25mm long Tool Steel\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e(TS) blade hardened to Rc 62-64 OR a High Speed Steel (HSS) blade hardened to Rc 62. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe HSS is ideal if you plan to reverse the blade to bevel up and use it as a scraper on hard timber.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe plane (when used with the blade bevel down) has a 60 degrees blade pitch for planing and by reversing the blade to (bevel up) it will perform as a scraper for use of hard cranky woods.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUsed for shaping and fine finishing of very tight inside curves that you find in Lutherie and furniture making. It can also be used for flats and outside curves or a combination thereof.\u003c\/p\u003e","brand":"HNT Gordon","offers":[{"title":"TS Blade","offer_id":39999141675110,"sku":"HNT Gordon Small Spokeshave TS","price":194.99,"currency_code":"CAD","in_stock":true},{"title":"HSS Blade","offer_id":39999141707878,"sku":"HNT Gordon Small Spokeshave HSS","price":224.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/products\/Smallcurvedspokeshave1.jpg?v=1672358180"},{"product_id":"hnt-gordon-a55-trying-plane","title":"HNT Gordon A55 Trying Plane","description":"\u003cp data-mce-fragment=\"1\"\u003eThis Trying Plane (alternatively known as a jointer or jointing plane) has an adjustable blade set at 55 degrees - which excels on hard, difficult woods with reversing grain direction. Alternative use as a 85 degree cabinet scraper by reversing the blade. Used for smoothing long surfaces, and jointing long boards.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis Gidgee A55 trying plane is 460mm long x 67mm wide x 41mm high. (18.1\"x 2.64\"x1.6\"). Weighs 1.9Kg (4.2 lbs) and has the option of a 50mm wide x 6mm thick x 101mm long Tool Steel (TS) blade hardened to Rc 62-64 or a High Speed Steel (HSS) blade hardened to Rc 62. \u003cspan data-mce-fragment=\"1\"\u003eThe HSS is ideal if you plan to reverse the plane to bevel up and use it as a scraper on hard timber.   \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor adjustment there is a fine thread screw with lateral movement (10th of a turn gives meaningful change in depth). The mouth is protected by a brass rub plate. Knob and tote handle superbly shaped by Ross Burgess.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWorks very well when used on a shooting board.  A cabinet makers work horse.\u003c\/p\u003e","brand":"HNT Gordon","offers":[{"title":"TS Blade","offer_id":39999560482918,"sku":"HNT Gordon A55 Trying Plane TS","price":559.99,"currency_code":"CAD","in_stock":false},{"title":"HSS Blade","offer_id":39999560515686,"sku":"HNT Gordon A55 Trying Plane HSS","price":587.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/products\/A55TryingPlane1.jpg?v=1672512045"},{"product_id":"hnt-gordon-gidgee-handles-for-accu-burr","title":"HNT Gordon Handles for Accu-Burr","description":"\u003cp class=\"\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cem\u003eHANDLES ARE SOLD INDIVIDUALLY\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"\"\u003eThese handles are designed and manufactured by HNT Gordon to fit the Accu-Burr™ Burnisher and are sold individually - they do not include the actual carbide burnisher rod which are available from Lee Valley.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eHandle Specifications: \u003c\/span\u003e\u003c\/div\u003e\n\u003cp class=\"\"\u003eThe length of one handle is 90mm, with a 3\/16\" hole that allows the\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eAccu-Burr™ rod\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eto accurately fit. We sell the handles individually  to fit onto one or both sides of the rod depending on whether you prefer to have one handle or two.\u003cbr\u003eThe ferrule is 11mm brass, and the wooden handle has a 14-16mm diameter and turned from Gidgee, ebony or black and white ebony.\u003c\/p\u003e\n\u003cdiv\u003eThey fit comfortably in your hand and the raised section fits nicely between your first and second finger. You can glue the \u003cspan data-mce-fragment=\"1\"\u003eAccu-Burr™ \u003c\/span\u003ein with a few drops of super glue, or the hole is a nice fit 20mm deep into the brass so you can just hold them on when being used.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eNote that Qty 1 = 1 handle only and does not include the Accu-Burr carbide burnishing rod.\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"HNT Gordon","offers":[{"title":"Gidgee","offer_id":40711147585638,"sku":"HNT Gordon Gidgee Handle","price":24.99,"currency_code":"CAD","in_stock":true},{"title":"Black and White Ebony","offer_id":40711147618406,"sku":"HNT Gordon B\u0026W Ebony Handle","price":29.99,"currency_code":"CAD","in_stock":true},{"title":"Ebony","offer_id":40711147651174,"sku":"HNT Gordon Ebony Handle","price":29.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/products\/GidgeeAccu-burrhandle1.jpg?v=1678417895"},{"product_id":"hnt-gordon-tilting-vise-jaw","title":"HNT Gordon Tilting Vise Jaw","description":"\u003cp\u003eThe HNT Gordon tilting vice jaw is designed to enhance your pattern makers or front vice, by allowing you to hold a vast array of shapes including wedges, tapers and double tapers. These objects can be large or small.\u003c\/p\u003e\n\u003cp\u003eThe jaw is 150mm long x 50mm wide, and the brass dog will fit into a 1\/2\" hole that is 1\/2\" deep. The jaw will tilt to 16 degrees in any direction, giving it vast capabilities. \u003c\/p\u003e\n\u003cp\u003eThe jaw rotates on a brass knuckle, and the tension on the brass knuckle can be adjusted by simply loosening two grub screws and tightening the threaded knuckle cap, and then re tightening the grub screws (see photo 3).\u003c\/p\u003e\n\u003cp\u003eThe tilting jaw can be used in the back jaw of the pattern makers vice, which has two 1\/2\" holes to accept the brass dog. The tilting jaw can also be used with your HNT Gordon front vice to significantly enhance its capabilities. You can do this by simply drilling a 1\/2\" hole in the side of your bench which you use as your back jaw.  Make sure you only drill your hole to a maximum of 1\/2\" deep.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"HNT Gordon","offers":[{"title":"Default Title","offer_id":40059565899878,"sku":"HNT Gordon Tilting Vise Jaw","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/products\/HNTGordonTiltingViseJaw.jpg?v=1678418643"},{"product_id":"cork-liners-for-vises","title":"Cork Liners for Vises","description":"\u003cp\u003eCork Liners for HNT Gordon Front Vises and Pattern Makers Vises:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Pattern Makers Vise:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the cork\/rubber lining that can be glued to the jaws of your pattern makers vice. You can choose to only glue the liner to one aluminum jaw (we find this works well for our plane making work), or you can buy 2 pieces of liner and glue them to both jaws.\u003c\/p\u003e\n\u003cp\u003eIf you order 1 piece of liner, you will receive the piece shaped to suit the front jaw.  If you order two pieces of liner, you will receive both the front jaw and the liner to suit the back jaw.\u003c\/p\u003e\n\u003cp\u003eThe liner is cut slightly oversized to allow you to trim the edges once it has been glued. \u003c\/p\u003e\n\u003cp\u003eWe use contact adhesive glue to attach it on to the vice. You can get this in spray cans or wipe on form.\u003c\/p\u003e\n\u003cp\u003eThickness of the cork\/rubber liner is 1.5mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Front Vise:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the cork\/rubber liner that can be glued to the jaw of your front\/bench vice. \u003c\/p\u003e\n\u003cp\u003eThe liner is cut slightly oversized to allow you to trim the edges once it has been glued.\u003c\/p\u003e\n\u003cp\u003eWe use contact adhesive glue to attach it on to the vice. You can get this in spray cans or wipe on form.\u003c\/p\u003e\n\u003cp\u003eLiner thickness is 1.5mm.\u003c\/p\u003e","brand":"HNT Gordon","offers":[{"title":"Liner for Front Vise","offer_id":40059566915686,"sku":"HNT Gordon Front Vise Cork Liner","price":13.99,"currency_code":"CAD","in_stock":true},{"title":"Liner for Pattern Makers Vise","offer_id":40059566948454,"sku":"HNT Gordon Pattern Makers Vise Cork Liner","price":14.99,"currency_code":"CAD","in_stock":true},{"title":"Liner for Wide Jaw Front Vise","offer_id":40417269448806,"sku":"","price":13.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/products\/FrontBenchViseCorkLiner1.jpg?v=1678419399"},{"product_id":"hnt-gordon-wide-jaw-front-vise","title":"HNT Gordon Wide Jaw Front Vise","description":"\u003cp data-mce-fragment=\"1\"\u003eThe design of the HNT Gordon wide jaw front vise incorporates precision machined concentric tubes to eliminate racking.  It is easy to install and features 6 TPI ACME threads for fast movement with the threads hidden to prevent wear.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003eSPECIFICATIONS\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eJAW:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e160mm x 340mm\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eOPENING CAPACITY:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e150mm\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWEIGHT:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 9.9\u003c\/span\u003e kg\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTHREAD:\u003c\/strong\u003e \u003cspan data-mce-fragment=\"1\"\u003e6 TPI ACME for fast, smooth action.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThread is hidden to prevent wear.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDESIGN \u0026amp; MANUFACTURE:\u003c\/strong\u003e U\u003cspan data-mce-fragment=\"1\"\u003enique design, manufactured in Australia.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e                                    \u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e This v\u003c\/span\u003eice has a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e160mm x 340mm jaw\u003c\/strong\u003e, which is wider than the regular front vice model. This vice was created in addition to the standard front vice for people who need a larger clamping area for larger pieces of wood. It can be very beneficial for certain types of woodworking e.g. drawer making. \u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e                                    \u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eVice does not come with dog holes drilled in the top of the vice as seen in some of the photos\/videos. If you decide to add dog holes once you receive your vice, we recommend not to do them larger than 1\/2\" as it may compromise the jaw, and you may lose your warranty.   If you add them it may be better to have it done by a machine shop.\u003c\/div\u003e","brand":"HNT Gordon","offers":[{"title":"Without dog holes","offer_id":41340534128742,"sku":"HNT Gordon Wide Jaw Front Vise-1","price":859.99,"currency_code":"CAD","in_stock":true},{"title":"With dogs holes","offer_id":41340534161510,"sku":"HNT Gordon Wide Jaw Front Vise-2","price":889.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/products\/widejawfronvise2.jpg?v=1679531396"},{"product_id":"hnt-gordon-pattern-makers-vise","title":"HNT Gordon Pattern Makers Vise","description":"\u003cp\u003e\u003cspan\u003eThe HNT Gordon  \u003c\/span\u003e\u003cem\u003epattern maker’s vise\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eis designed to hold any object, from those with parallel sides through to those with tapers or double tapers. To hold tapered objects, you will need the\u003cspan\u003e \u003c\/span\u003e\u003cem\u003etilting plate\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ewhich fits into the vise’s\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eback jaw\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eusing a ½” dog hole. If holding parallel objects this\u003cspan\u003e \u003c\/span\u003e\u003cem\u003etilting plate\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eis not required. The tilting plate is an additional purchase and is not included in the price of the vise. This can be purchased\u003cspan\u003e separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can also custom make a tapered jaw to hold a particular job you have. This can be held in the back jaw using a ½” dowel in the corresponding dog hole.\u003c\/p\u003e\n\u003cp\u003e The\u003cspan\u003e \u003c\/span\u003e\u003cem\u003epattern maker’s vise\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ewill hold objects up to 150mm (6”) wide. This is reduced to 120mm (4 3\/4”) when using the\u003cspan\u003e \u003c\/span\u003e\u003cem\u003etilting plate\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003efitted. The jaw size is \u003cspan data-mce-fragment=\"1\"\u003e160mm x 340mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e In both cases, the vise will rotate 360° to give four different working heights and any angle in between. The vise will also tilt 90° from vertical to horizontal and is capable of being locked at any angle.\u003c\/p\u003e\n\u003cp\u003e This vise has the new generation precision non-racking design which gives you significant holding power with little force on the\u003cspan\u003e \u003c\/span\u003e\u003cem\u003ecrank handle\u003c\/em\u003e. If using your vise a lot, this will significantly reduce your workload over the course of a day.\u003c\/p\u003e\n\u003cp\u003e You can put a cork rubber liner\/ leather (or equivalent) soft jaw on th\u003cem\u003ee front and\/or back jaw \u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003efor better work holding when dealing with timber that is not quite parallel, which can be purchased\u003cspan\u003e separately.\u003c\/span\u003e\u003c\/p\u003e","brand":"HNT Gordon","offers":[{"title":"Default Title","offer_id":40082491080806,"sku":"HNT Gordon Pattern Makers Vise","price":2299.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/products\/HNTGordonPatternMakersVise1.jpg?v=1679532164"},{"product_id":"hnt-gordon-3-4-brass-bench-dogs","title":"HNT Gordon 3\/4\" Brass Bench Dogs","description":"\u003cp class=\"\"\u003eThese dogs, made from solid brass, have a 3\/4\" shaft. The head is 1\" square. You have the option of different head heights ranging from 1mm to 3\/4\". Thinner head heights are ideal when working with thin pieces of wood, such as shop sawn veneer. The 3\/4\" shaft is approximately 3 thousandths under to ensure a nice fit in your bench top holes.\u003c\/p\u003e\n\u003cp class=\"\"\u003eOne edge of the dog head is slightly curved and angled at 2 degrees to allow it to bite into the wood being held.\u003c\/p\u003e\n\u003cp class=\"\"\u003eThese dogs \u003cstrong\u003ecan't\u003c\/strong\u003e be used in the actual HNT Gordon tail vises. The tail vises house a 1\/2\" shaft dog only, which is included with each tail vise. These 3\/4\" shaft dogs are for those who already have 3\/4\" dog holes in their work bench, and can be used in conjunction with HNT Gordon tail vises.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"HNT Gordon","offers":[{"title":"1 mm","offer_id":40082496159846,"sku":"1 mm 3\/4\" Brass Bench Dog","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"1\/8\"","offer_id":40082498158694,"sku":"1\/8\" Bench Dog 3\/4\" shaft","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"1\/4\"","offer_id":40082498191462,"sku":"1\/4\" Brass Dog 3\/4\" Shaft","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"1\/2\"","offer_id":40082498224230,"sku":"1\/2\" Brass Dog 3\/4\" shaft","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"3\/4\"","offer_id":40082498256998,"sku":"3\/4\" Brass Dog 3\/4\" shaft","price":22.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/products\/threequarterinchdogs.jpg?v=1679532990"},{"product_id":"hnt-gordon-1-2-brass-bench-dogs","title":"HNT Gordon 1\/2\" Brass Bench Dogs","description":"\u003cp class=\"\"\u003eThese Bench Dogs are made from solid brass. They have a 1\/2\" shaft, and the head is 3\/4\" square. You have the option of different head heights ranging from 1mm to 3\/4\" thick. Thinner head heights are ideal when working with thin wood, such as shop sawn veneer. W\u003c\/p\u003e\n\u003cp class=\"\"\u003eOne edge of the dog head is slightly curved and angled at 2 degrees to allow it to bite into the wood being held.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"HNT Gordon","offers":[{"title":"1 mm","offer_id":40082500485222,"sku":"1 mm Brass dog 1\/2\" shaft","price":16.99,"currency_code":"CAD","in_stock":true},{"title":"1\/8\"","offer_id":40082500517990,"sku":"1\/8\" Brass Dog 1\/2\" shaft","price":16.99,"currency_code":"CAD","in_stock":true},{"title":"1\/4\"","offer_id":40082500550758,"sku":"1\/4\" Brass Dog 1\/2\" shaft","price":16.99,"currency_code":"CAD","in_stock":true},{"title":"1\/2\"","offer_id":40082500583526,"sku":"1\/2\" Brass Dog 1\/2\" shaft","price":16.99,"currency_code":"CAD","in_stock":true},{"title":"3\/4\"","offer_id":40082500616294,"sku":"3\/4\" Brass Dog 1\/2\" shaft","price":16.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/products\/1mmdog.jpg?v=1679534386"},{"product_id":"hnt-gordon-gidgee-plane-adjusting-mallet","title":"HNT Gordon Gidgee Plane Adjusting Mallet","description":"\u003cp\u003eThis mallet is made from Gidgee and is 150 grams. It is a light weight mallet designed for setting or adjusting blades in wooden planes. A brass retaining nut holds the head onto the handle and has HNT Gordon stamped in it.\u003c\/p\u003e\n\u003cp\u003eWe use a head with a heavier wood to the handle to give the mallet balance.\u003c\/p\u003e\n\u003cp\u003eNote: timber grain may vary from the one in the photos.\u003c\/p\u003e","brand":"HNT Gordon","offers":[{"title":"Default Title","offer_id":41355348181094,"sku":"HNT Gordon Gidgee Mallet","price":71.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/files\/GidgeeMallet.jpg?v=1714769282"},{"product_id":"h-s-leather-tool-rolls","title":"H\u0026S Leather Tool Rolls","description":"\u003cp\u003eThese leather tool rolls are made in Australia by Harold and Saxon Toolworks and are very nice quality - they have 9 pockets for holding chisels or other tools.  The deluxe version is made of heavier leather.\u003c\/p\u003e","brand":"Harold and Saxon Toolworks","offers":[{"title":"Standard","offer_id":44184898732134,"sku":"H\u0026S Standard Toolroll","price":113.99,"currency_code":"CAD","in_stock":true},{"title":"Deluxe","offer_id":44184898764902,"sku":"H\u0026S Deluxe Toolroll","price":129.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/files\/H_SPremiumToolRoll2.jpg?v=1765505965"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1641\/8473\/collections\/transparent_600x_5b0e29c8-8d2d-49d0-8f0c-f12bba25a905.png?v=1734803779","url":"https:\/\/www.northwestpassagetools.com\/collections\/hnt-gordon\/northwest-passage-tools.oembed?page=2","provider":"Northwest Passage Tools","version":"1.0","type":"link"}